EXPLODING LIGHT BULBS(_>SHADOW HAWK 1<_) I ACTUALLY GOT THIS FROM A MOVIE, AND HAVE TRIED IT [IT WORKS!!!]. OK YOU MAY HAVE TO DO THIS A COUPLE TIMES BEFORE YOU GET IT. HERES WHAT YOU NEED: A FEW LIGHT BULBS TORCH [ONE THAT WILL MELT GLASS, RADIO SHACK SINGLE CYLENDER MODEL WILL DO] SOME GASOLINE SOME LIQUID SOAP SOME EPOXY GLUE HERES WHAT YOU DO: 1) MAKE A HOLE IN THE LIGHT BULB LIKE THIS: * --- : : MAKE HOLE HERE : : OR HERE. \ / \ / / \ : : : : \---/ NOT HERE!!!!! 2) MAKING THE HOLE, LIKE IN THE DIAGRAM [DONT MAKE IT ON THE BOTTOM, BECAUSE IF THE SEAL YOU WILL MAKE SHOULD BREAK, THE PERSON/ROOM YOU WANT TO ELIMINATE WILL NOTICE THE HOLE [AND THE GASOLINE ON THE FLOOR!!!] WHEREAS THE IF ITS ON TOP IT WILL STILL WORK... 3) NOW CAREFULLY FILL THE LIGHT BULB ABOUT HALF FULL WITH GAS, AND THEN THE REST WITH SOAP [HOLD ON ANGLE IF YOU HAVE TO]. NOW EPOXY THE HOLE SHUT, AND SCREW IT IN... HAVE PHUN (_>SHADOW HAWK 1<_) |